Ever Glory provides 7 inch industrial panel PCs with capacitive touch screens for industrial automation, HMI control panels, machine monitoring, production line terminals and smart manufacturing equipment.
Designed for demanding industrial environments, this compact panel PC can be customized with projected capacitive touch, rugged front panel, waterproof structure, wide temperature support, flexible interfaces, embedded computing platform and OEM/ODM mechanical integration.
Specifications:
| Resolution | 1920×1080 |
| Luminance | 300Cd/㎡ |
| Contrast Ratio | 1000:1 |
| Viewing Angle | 89/89/89/89 |
| Display color | 16.7M |
| Response Time | 14ms |
| MTBF | 30000h |
| Response Time | ≤5ms |
| Touch Points | 1-10 points |
| Touch Type | Projected Capacitive Touch |
Why Industrial Automation Needs a Reliable 7 Inch Panel PC
In industrial automation systems, a 7 inch panel PC is often used as the local human-machine interface for machine control, parameter setting, alarm display, data monitoring and production status visualization.
Unlike standard commercial tablets, industrial panel PCs must operate reliably in environments with dust, vibration, electrical noise, temperature changes, long working hours and frequent operator interaction. The hardware, touch screen, structure, interface and installation method must be designed for industrial use from the beginning.
How to Improve the Reliability of Touch All-in-One PCs in Industrial Environments
We design the 7 inch industrial panel PC with an industrial-grade structure, stable touch screen, embedded hardware platform and suitable thermal design. The enclosure, front panel, interface layout and mounting method can be customized for machine-side installation instead of handheld consumer use.
How to Improve the Anti-Interference Performance of Touch Display All-in-One Machines
Industrial automation equipment often generates electrical noise. We can optimize grounding design, touch controller selection, shielding structure, cable routing and interface protection to improve touch stability. EMI/EMC pre-evaluation can be considered during project development.
How to Optimize Glove Touch Performance of Touch Display All-in-One Devices
Capacitive touch sensitivity can be tuned according to glove material, cover glass thickness and operating environment. During sample validation, touch performance can be tested with customer-specified gloves to balance sensitivity and false touch prevention.
FAQ
Q1: Why does the touch screen drift or have offset coordinates especially at the edges?
A: It is mainly caused by inconsistent thermal expansion between layers, uneven ITO electrode impedance and lack of edge compensation design. Our product adopts uniform grid ITO layout, outward extended edge electrodes and strictly controlled etching tolerance within ±3μm, together with factory coordinate calibration to effectively eliminate edge deviation.
Q2: Can this touch all-in-one machine work normally when operators wear cotton or rubber gloves?
A: Yes. We adopt high-sensitivity industrial touch IC with adjustable glove mode, lower touch trigger threshold and high-frequency signal sampling to capture weak capacitance signals through gloves. The G+G fully laminated structure reduces medium signal attenuation and guarantees stable glove touch experience.
Q3: Will frequent electromagnetic interference from industrial equipment lead to false touch or touch failure?
A: The device supports comprehensive anti-interference design including single-point grounding system, rear metal shielding cover, multi-stage ESD and surge protection circuits on the driver board, plus built-in interference filtering algorithms, which can resist EMI from inverters, motors and power equipment in industrial sites.
Q4: What temperature range can the touch module withstand for long-term operation?
A: The lamination uses industrial wide-temperature OCA adhesive with a working range of -40℃ to 85℃. The touch chip and overall structure are adapted to extreme cold and high-temperature environments, avoiding degassing, delamination and disconnection caused by thermal expansion and contraction.
Q5: How to avoid touch blind areas on the four corners and screen borders?
A: Compensation electrodes are added at four corners, and the effective sensing area extends 2~3mm beyond the visible display area to cover the frame range. Smooth transitional wiring replaces sharp-angle etching to prevent weak corner signals and missed touches.
Hot Tags: 7 Inch Industrial Panel PC | Capacitive Touch HMI for Industrial Automation, China, suppliers, factory, customized, 4 inch android touch panel, touch screen panel assy genuine, 116 touch panel with eeti controller board, touchwin touch panel, win 10 touch panel, xinje touch panel




